click on the fields you would like to learn about click on the fields you would like to learn about click on the fields you would like to learn about click on the fields you would like to learn about click on the fields you would like to learn about Click on the fields you would like to learn about

 

 

TCP/IP Port   

This defaults to 500, but you can set it to whatever you like. Your firewall will need to be configured to allow connection to the server through the port that you selected.

Idle ID time   

This is the interval between callsign identification on RF gateways whilst a room is idle.

Force ID   

This is the interval between callsign identification on RF gateways whilst a room is busy.

VOX Hold   

This is length of the silence period needed before a gateway stops sending to the server.

Admin Password   

If a password is used, this will only allow users who know the password to connect to the server.

Log File Name   

A log file can be used to record activity on the server. The main use for this file is for reporting faults. If you use this option, beware... the file can become very large.

Maximum Number of Users   

Enter the maximum number of users that the bandwidth of your connection can support.

User Password   

This is the password used by the Admin software to gain control of the server.

Maximum SWL's

“0” (zero) means no SWL’s allowed. “-0” (minus zero) means unlimited SWL’s. All other numbers are “real” numbers – e.g. “4” means 4 SWL’s allowed.

Maximum IP connections

Maximum connections from 1 IP. If you type "3" in the box, no user can connect more than 3 times from any one IP address.

Server Keepers E Mail   

This is optional, and if used appears to the right of your Server address on the System Monitor.

Server Comment   

This is optional, and if used appears to the right of your Server address on the System Monitor next to your E Mail address if entered.

The Servers IP address or URL    

Most servers on the eQSO System use Dynamic Routing  from a permanent URL (domain name) to whatever the IP address of your PC when connected to the Internet.

Example - repeater.dns2go.com

If you have a fixed IP address then you can use this instead.

Allow Client software before 3.0 to connect   

Some users may not have upgraded to the current software version, check this to allow them to access the server.

Register

Register. Click on the "Register Server" button. Enter your unique password and registration key that eQSO sent to the e-mail address you supplied. Click the "Register" button.

View connected users   

This screen shows the callsign of users connected to the server and which room they are in.

Start   

If you use dynamic routing, ensure the routing software is stated before starting the server.

To start the server, click on the start button.

To stop the server, click on on the stop button.